Do you have a question about the Audiovox TERK TV5 and is the answer not in the manual?
The TV5 features a low-noise amplifier optimized for signal strength, with a bypass for stronger local stations.
The TV5 has a video selector switch for easy switching between TV and other video sources without rewiring.
Instructions for assembling the TV5 by inserting receiving elements and securing the center cap for a snug fit.
Details two methods for connecting the TV5 to televisions with single or separate VHF/UHF 75 Ohm inputs.
Instructions on connecting the AC adapter to the TV5 and plugging it into a 12-volt AC outlet for operation.
Steps for tuning the TV, rotating the antenna, and adjusting amplification for optimal VHF/UHF reception.
Guidance for connecting satellite, cable, or video game adapters and switching the selector to 'Video' mode.
Important usage notes regarding forcing the control arm, placement near metal, lifting the unit, and TV menu settings.
Guidance on placing the TV5 in an optimal location for receiving TV signals, such as on top of a standard TV.
Explains why channels above 13 may not be received and how to switch TV tuner mode from Cable to ANT/AIR.
Advises that metal cabinets block signals and the antenna must be placed outside or above them.
Recommends placing the antenna near a window to minimize interference and improve reception with aluminum siding.
States that TV signals cannot penetrate basement locations due to lower elevation, affecting reception.