-5-
REMOTE CONTROL OPERATION
-
BATTERY INSTALLATION
Before attempting to operate the Remote Control,
install the batteries as described below.
1) Turn the Remote Control face down. Press
down on the ridged area of the battery cover, and
slide it off.
2) Install Two “AAA” batteries as shown. Make sure
that proper polarity (+ or -) is observed.
3) Slide the cover back until it clicks into position.
The Remote Control will operate the VOH1041DL,
and Audiovox VCP’s. It is not a universal remote
control and will not control equipment from othe
manufacturers.
If a universal Remote Control is used with the
VOH1041DL, choose the remote control encoding
scheme for Audiovox Televisions when
programming the remote.
POWER
MUTE
5
3
4
9
11
12
1
2
7
8
10
VCP POWER PLAY
REW F.FWD REPLAY STOP
PIC
MENU
VOL. +VOL. –
PIC
SOURCE
6
To Next Page
Loading...
Need help?
General
