45
11 If the selected FM channel doesn’t work well for you, work down
the list of FM channels until you find one that allows you to hear
XM clearly. Each time, you will need to tune your vehicle’s FM radio
to the FM channel and then set your radio to transmit on the same
FM channel (steps 7 & 9).
If the signal reception is good, but there is no XM audio when tuned to
channel 1, verify that your radio’s FM Transmitter is On (step 8), and that both
the FM Transmitter and your vehicle’s FM radio are tuned to the same FM
channel (steps 7 & 9). Also ensure the chosen FM channel is a suitable one
to use in your area (step 5). Verify that nothing is plugged into the AUDIO
connector on the PowerConnect Vehicle Dock. Refer to “Troubleshooting” on
page 52 for additional help.
Option 4: FM Direct Adapter (FMDA) Installation
The FMDA needs to be installed by a professional installer. Professional
installation can help improve your radio’s reception and significantly reduce
the visibility of wires. To learn more, check with the retailer where you bought
your radio, or go to xmradio.com/accessories.
Your installer will help you get set up, but if you travel away from your local
area, you will want to familiarize yourself with the section called “How To Find
Available FM Channels In Your Area” on page 48.
To Next Page
Loading...
