What to do if there is no audio from my Audiovox Car Receiver?
If you are not getting any audio from your Audiovox Car Receiver, first ensure that both the car stereo and the BCS1M are powered on. Then, check that the stereo volume is at a comfortable listening level. Finally, verify that your Bluetooth-enabled device is properly connected to the BCS1M via Bluetooth.
Why I am having trouble pairing my device with my Audiovox Car Receiver?
If you're experiencing trouble pairing your device with the Audiovox Car Receiver, make sure your phone’s Bluetooth is turned on and set to search mode. If you have previously paired to a BCS1M, clear the previous pairing from your phone’s device list.
What to do if I cannot select the interface on my Audiovox Car Receiver?
If you cannot select the interface on your Audiovox Car Receiver, you should: 1. Verify the cable connections. 2. Double check the DIP switch settings. 3. Verify the firmware version using the Audiovox OEI firmware updater.
How to fix Sirius tuner selection issues on Audiovox Car Receiver?
If the Sirius tuner cannot be selected on your Audiovox Car Receiver: * Ensure the cable connecting the SIRIUS tuner is securely connected to the correct receptacle. * Verify, using the Audiovox OEI firmware adapter application, that the interface module is properly set to work with the Satellite radio tuner type.
Initial steps including verifying compatibility, disconnecting the battery, and locating the vehicle's factory harness.
Steps for setting DIP switches, routing the kit, and connecting the CarStream module and vehicle harness.
Explanation of the multi-function button's operations for calls, music playback, and voice commands.
General| Brand | Audiovox |
|---|---|
| Model | CarStream |
| Category | Automobile Electronics |
| Language | English |
To Next Page
