Audyssey MultEQ Pro - Calibration Setup and Preparation; Connecting the Installer Kit Components

Audyssey Installation Reference Guide
Audyssey Laboratories, Inc. 350 South Figueroa St., Suite 196, Los Angeles, CA 90071
Tel: (213) 625-4300 http://www.audyssey.com

�

�






























  
               
        
 

STEP 16
After your customer’s Sound Equalizer installation, upload
their MultEQ Pro calibration results to your personal account
on the Audyssey Installer Web Site.
This has three functions:
1 It stores the speaker delays, levels and crossover information
you entered into your customer’s preamplifier/processor(s).
It also stores your customer’s equipment for each zone you
installed for them.
2 It creates a Customer Certificate (below), which Audyssey mails
to you within a few days.
3 It stores your customer’s MultEQ Pro time and frequency
response correction results on your personal account on the
Audyssey Installer Web Site. You can log onto the web site to
view these results anytime.
Please visit www.audyssey.com/installer
to register and create your personal account
on the Audyssey Installer Web Site.