August MB420 - Page 12

You cansetyour radio to tum off automaticallyusingthesleeptimer.
You canchooseatime before switching off: 15,30,45, 60 or 90minutes.
6.2 Alarm
I. Pressand hold "Info/Menu". Choose "System" and press "Select" to
confirm. Choose "Alarm" with or andpress "Select" to confirm.
2. Select "Alarm 1" or "Alarm 2" and press "Select" to confirm.
3. Select the Hour of the alarm and press "Select to confirm. Select the
minutes of the alarm and press "Select" to confirm
4. Select the duration of the alarm (15, 30, 45, 60 or 90) and press
"Select" to confirm.
5. Selectthe sourceof thealarm (DAB, FM, USB, Buzzer) andpress
"Select" to confirm. If you use the radio, select the station and press
"Select" to confirm.
6. Select the frequency (Daily, Once, Weekends, Weekdays) and press
"Select" to confirm.
7. Adjust the volume and press "Select" to confirm
8. Select « On » or « Off » to activate or desactivate the alarm, and press
"Select" to confirm. When finished, "Alarme Saved» is displayedon
the screen.
Snooze
When the alarm sounds, Press any key (except Standby, stop Alarms)
buttonto keepSnoozinganother9minutes.
StopAlarms
When the alarm sounds, press the standby button to stop;
6.3 Time
In the Time menu, you can set the Time and Date.
_9_
Setthetime by tuming theVolume Control Button confirm by pressing
Select.Setthedateby tuming theVolume Control Button andconfirm
by pressingSelect.Once saved,the Time will show on thedisplay.
In theTime menu,you canselectotherparameterby tuming Volume
Control Button.
Setthetime anddateupdatemethod:Updatefrom Any / Updatefrom
DAB+ / Update from FM /
No update and then press "select" to confirm
Set the 12 /24 hour: Set time format to 24-hour or 12-hour, and then press
select to confirm. Set date format to DD/MM/YYYY or MM/DDNYY,
andthenpressSelectto confirm.
Note: The time and date will be resetby default after the device is powered
off and rebooted. Please turn the radio on and the date will automatically
update when a channel is tuned.
6.4 Backlight
Follow the below instructions to select the backlight menu. The sections
after explain each setting.
I .Press and hold the Menu button
2.Whenthe 'Full Scan(DAB)or ' ScanSetting(FM) option appearspress
eitherPrev.or Next buttonsto cycle through themenu optionsuntil you
locate'system'.Pressthe Selectbutton to select
3.Use the Prev. or Next buttons to locate the Backlight option and press
the Select button.
Timeout:
Following backlight settingl -3steps
I .UsethePrev.or Next buttonsto locatetheTimeout option andpress
the Select button
2.Use the Prev, or Next buttons to cycle through options 10-180 seconds
3.Pressthe Select button to store the setting
-10-