On level
Following backlight setting I -3steps
I. Use thePrev.or Next buttons to locatethe On level option andpress
the Select button
I. Use the Prev. or Next buttons to cycle through Low or High
3. Pressthe Select button to store the setting
4. The Low or High backlight brightness level will be effective
immediately andrestorethedefault backlight level accordingto the
selectedTimeout option.
Dim level
Following backlight settingl -3steps
I. Use thePrev.or Next buttons to locatethe'Dim level option and
press the Select button.
2. Use the Prev. or Next buttons to cycle through Low or High
3. Pressthe Select button to store the setting.
4. The Low or High backlight brightnesslevel will beeffective
accordingto the selectedTimeout option.
6.5 Language
The language used for display messagescan be selected from below
options:English French Gemun Italian Spanish Portuguese
Polish Swedish Danish Finnish Cycle through Languagemenuby
turn the Volume Control Button to select and stop at a particular
language by pressing "Select" .
6.6 Factory reset
A factory reset clears all user settings, replacing them with the original
default values, so time/date, preferences/settings, DAB+ station list and
preset stations are all lost.
If you select"Factory reset", you areaskedto confirm by selecting
"YES". Under advancesetting,turn theVolume Control Button to
select "Factory reset" through the menu list, you are asked to confirm
by selecting "YES".
6.7 SW version
This displays the current software version.
Cycle through the menu,turn theVolume Control Button to find "SW
version" in the menulist, thenpressSelect.
I.Info
You can view further information when the unit is working under DAB
mode. PressInfo/menu Button repeatedly and you can have options
include:
•DLS (Dynamic Label Segment short text information broadcast with
DAB+ audio)
•Signal Strength
•PTY (ProgrammeType)
•Ensemble
•Frequency
•Signal Quality
•Bitrate codec
•Time
•Date
5.8.2 FM radio mode
Under Advance Settings, turn the Volume Control Button to cycle
through themenu list, then stopatyour preferredoption. The selected
function will stan automatically after I second. The advance setting
menu options are:
-12-
To Next Page
Loading...
