Turning On / Off
Pairing
Starting with the earbuds in the case:
1.
2.
3.
4.
Take the left and right earbuds out of the case. They will turn on automatically
and connect with each other within 5 seconds
After the earbuds have connected successfully, the LED status indicator on the
master earbud will flash white slowly. This indicates the earbuds are ready to pair
From the list of available devices, find and select “AUKEY EP-T31”
If a code or PIN is required for pairing, enter “0000”
Turn On
Turn Off
Remove both earbuds from the charging case or touch and hold
on the touch-sensitive panels on both earbuds for 2 seconds when
they are turned off
Return both earbuds to the charging case or touch and hold on
the touch-sensitive panels on both earbuds for 5 seconds when
they are turned on
- 05 -
To Next Page
Loading...
