AUMA GS 315 - Default Chapter; Table of Contents

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Store operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Target group:
This document contains information for assembly, commissioning and maintenance staff.
Table of contents Page
41. Safety instructions.................................................................................................................
41.1. Basic information on safety
51.2. Range of application
51.3. Warnings and notes
51.4. References and symbols
72. Identification...........................................................................................................................
72.1. Name plate
92.2. Short description
103. Transport and storage...........................................................................................................
103.1. Transport
123.2. Storage
134. Assembly................................................................................................................................
134.1. Mounting position
134.2. Handwheel fitting
134.3. Multi-turn actuators for motor operation
144.3.1. Mounting positions Multi-turn actuators with part-turn gearboxes
154.3.2. Mount input mounting flange
174.4. Mount gearbox to valve
174.4.1. Overview on coupling variants
174.4.2. Mount gearbox with coupling to valve
205. Indications..............................................................................................................................
205.1. Mechanical position indicator/running indication
216. Commissioning......................................................................................................................
216.1. End stops in gearbox
216.1.1. Set end stop CLOSED (butterfly valves)
226.1.2. Set end position OPEN (butterfly valves) or modify swing angle at gearbox
246.2. Seating in end positions via multi-turn actuator
246.3. Set mechanical position indicator
267. Servicing and maintenance...................................................................................................
267.1. Preventive measures for servicing and safe operation
267.2. Maintenance intervals
267.3. Disposal and recycling
288. Technical data.........................................................................................................................
288.1. Technical data Part-turn gearboxes
2
GS 315 – GS 500
Table of contents GZ 30.1 – GZ 40.1