28
EN
USB/SD mode button
• As long as a USB/SD memory is connected, press the USB/SD Mode
button to switch between USB, SD and BT playback.
• Press and hold the button during USB/SD playback to quickly play a
single track. The LED light blinks rapidly.
Note: If you connect the system to an MP3 player via the USB slot, some
MP3 players may not play back via the USB slot due to dierences in the
MP3 encoding format. This is not a system malfunction. There are many
USB device manufacturers and encoding formats. Therefore, there is no
guarantee that all brands of USB/SD devices will support it.
Removing USB/SD Memory
To remove the USB/SD memory, rst set the function switch to RADIO or
TAPE, then remove the USB/SD memory from the corresponding slot.
BT FUNCTION
• This unit has BT function, which can connect and play music from your
BT device (such as mobile phone).
• Press fun button repeatedly to select “BT” on LCD display, then “not
connected” will be ashing, it means the unit is ready for connection
with your BT device.
• Switch on the BT function of your BT device, and select “DUKE-DAB” BT
equipment for connection.
• After your BT device is connected with the unit, “connected” will stay on
LCD display, then start to playback your device.
To Next Page
Loading...
