auna Pureness - Device Adjustments; Platter Speed Adjustment; Tone Arm Stopping Position; Line Out Connection

22
EN
Adjustments
Platter speed ne adjustment
• During playback of record, turn the Pitch Adjustment (3) to ne adjust
the platter rotation speed.
• Turning clockwise (+) will increase the turning speed and anti-clockwise
will slow down the speed.
• Turn the Pitch Adjustment until the output sound performance is up to
your satisfaction
Tone arm stopping position alignment
The position of the tone arm complete playback and return to the rest
station can be adjusted at the alignment screw (#15 for 30 cm vinyl; #16 for
17cm vinyl).
Line out connection
You can connect the system to your own Hi-Fi system by connecting the line
out socket (14) to the auxiliary input socket with a RCA cable.
If set the Phono / Line selector (12) at EQ ON position, the output signal will
pass through the system’s built-in pre-amplier circuit. If set the selector (12)
at Phono Thru, the output signal will come directly from the cartridge and
without amplied.