auna Silverstar - Aux in Mode

55
EN
button to play the songs which have been programmed.
• When the program playback is activated, press twice on Stop button,
then it will exit the program playback mode, back to USB playing.
AUX IN MODE
Aux in mode plays audio from an external source such as an MP3 player.
To play audio with Aux in mode
• To avoid sudden loud volume, turn the volume low on both radio and, if
adjustable, the audio source device.
• Connect the external audio source to the Aux in L and R binding port.
• To enter Aux in mode, either press mode and rotate the knob to cycle
through the listening modes until Aux in is displayed, or select Menu >
Main menu > Aux in.
• Adjust the volume of radio (and, if necessary, the audio source device)
as required.
BT
BT mode allows BT devices to pair with the radio, stream music .To enter
BT Audio mode, either press mode and rotate the knob to cycle through the
listening modes until BT Audio is displayed, or select Menu > Main menu >
BT.
To pair a BT device with the radio
In BT mode, on your radio press Menu > BT, this puts the radio into
discoverable mode. The BT name of the radio is “auna-bs-amp-359“. On
your BT smart device, make sure your BT is on and scan for device select the
radio from the list of available BT devices.
Control from radio
While in BT mode you can pause, play, jump to next track and jump to
previous track (in the playlist on the controlling BT device) using the buttons
available on the radio.