Assemby Instructions for APT4300 – Aunger 4’x 3’ Trailer
18
Spare Parts for APT4300
Whole Axle Assembly w/ Hubs
included APT1241
Mudguard (Pair) APT1242
Spare Wheel APT1243
Trailer Hub Assembly - Single APT1244
Coil Spring Shock Absorber APT1246
Dust Cap on Wheel APT1247
Left Side Panel APT1248
Right Side Panel APT1249
Front Panel APT1250
Back Tailgate Panel APT1251
Triangle Bracket APT1252
Drawbar w/out VIN & Tire Placard APT1253
Light board (including wiring & plug) APT1254
Trailer Platform APT1255
Black Tightening Device APT1256
Bolts Kit APT1257
Elbow (Drawbar Bracket) APT1258
Light Board Support Bracket APT1259
For costs on these spare parts or any other enquiry contact Aunger on 07 3260 2400 or
visit www.aunger.com.au
Information for registration:
Tare Weight 80 kgs
Tyre Size 118mm
Ply Rating 4 ply
Rim profile 8” x 3.75”
Cold Tyre Pressure 60 psi
Axle Rating 330 kgs
Coupling rating 2000 kgs
ATM 310 kgs
Trailer Measurements:
Length 1.9 m
Centre of Coupling to Centre of Axle 1.35 m
Centre of axle to Rear .55 m
Front of Box to Centre of Axle .65 m
Width edge to edge 1.29 m
Height .85 m
To Previous Page
Loading...