To Next PageTo Next Page
Need help?Do you have a question about the Auping AVS 455 and is the answer not in the manual?
General| Brand | Auping |
|---|---|
| Model | AVS 455 |
| Category | Outdoor Furnishing |
| Language | English |
Adjust mesh base firmness to body shape using Comfortslides at shoulder and hip levels.
Details on control box, drive motor, and remote control types for the AVS mesh base.
Diagram and list of components: Comfortslides, adjustable sections, leg positions, and handset.
Read instructions, check for damage, use specialists, household use only, supervise children.
Control system and motors operate on safe low voltage current.
Supplier installs base; drive motors fitted by specialists. Refer to installation cards for details.
Proper leg positioning ensures correct weight distribution. Specific distances for head/foot ends are indicated.
Adapt mesh base firmness by adjusting slides at shoulder and hip levels for optimal comfort.
Connect receiver via button press; sync with remote control for bed base adjustment.
Mount the RF receiver on the bottom of the base frame for optimal signal reception.
Secure the handset clamp to the side panel of the bed surround and click the handset into place.
Attach mattress connectors to mesh base and place mattress centrally. Ensure connectors are not over cross bars.
Check mesh base movement, mattress attachment, and plug into wall socket before initial use.
Lie on the mattress during initial adjustment for optimal contour following as it softens.
Adjust foot end positions using the handle. Pull up fully before lowering for a lower position.
Use the handset to raise/lower back and foot sections individually or simultaneously.
Identify buttons 1-6 on the wired remote control for adjusting bed sections.
Identify buttons 1-6 on the wireless RF remote control for adjusting bed sections.
Use the red LOCK button on the back of the remote to activate/deactivate the child lock.
Press the 'down' button on the receiver to lower all bed sections in case of emergency.
