General Instructions
Read and keep these instructions and install in accordance with
manufacturers directions. Refer all servicing to Aura Smart Air support.
Servicing is required when the device has been damaged in any way,
such as when the power-supply cord or plug has been damaged, liquid
has been spilled or objects have fallen into the device, the device has
been exposed to rain or moisture, does not operate normally, or has been
dropped.
Installation
Install the device according to manufacturer instructions to avoid the
device from tipping over. This device should be installed on brick, concrete,
drywall or other stable walls. The minimum distance around the device
for sucient ventilation should be 50 cm/19.6 inches. Place the device in a
location that is visible and any injury can be avoided.
Do not place Aura Air above beds, water sources, or other locations which
could be risky or are prone to injury.
Do not install Aura Air near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that produce
heat.
To Next Page
Loading...