Aura AR35TK-IN User Manual (English)

Questions and Answers:

W
William CookAug 6, 2025
Why is my Aura Air Conditioner cooling poorly?
- V
  Veronica StewartAug 6, 2025
  Poor cooling in your Aura Air Conditioner can stem from several factors. Check if the air filter is dirty and clean it, ideally every 15 days. Ensure there are no obstructions blocking the air inlet or outlet. Verify that the temperature is set correctly and that all doors and windows are closed. Direct sunlight can also impact cooling efficiency, so use curtains to block it. Finally, consider if there are excessive heat sources or too many people in the room, which can strain the unit's cooling capacity.
M
Mr. Kyle SandersAug 16, 2025
Why is there noise heard from my Aura Air Conditioner?
- S
  Shane AdkinsAug 16, 2025
  If you hear swishing or gurgling noises during operation or when the Aura Air Conditioner stops, this is likely due to refrigerant flowing in the system. A cracking noise might occur because the casing expands or shrinks with temperature changes. However, if there's a significant noise from airflow, the air filter may be too dirty.
T
Tracy BlakeAug 27, 2025
Why can’t the fan speed be changed in dry mode on my Aura AR35TK-IN Air Conditioner?
- S
  Sherri NewtonAug 27, 2025
  In DRY mode, the Aura Air Conditioner will run intermittently at LOW speed regardless of the FAN setting when the room temperature is lower than the temperature setting plus 2 degrees Celsius.

Aura AR35TK-IN Specifications

General

Brand	Aura
Model	AR35TK-IN
Category	Air Conditioner
Language	English

Summary

Operation Manual Overview

Safety Warnings and Precautions

General Safety Warnings

Crucial safety warnings regarding operation, storage, and handling of the air conditioner to prevent hazards.

Parts and Functions

Indoor Unit Components

Identifies and describes components of the indoor unit for the air conditioner.

Remote Controller Overview

Details the buttons and functions of the remote controller for the air conditioner.

Display Board Indicators

Explains the various indicators on the indoor unit's display board.

Outdoor Unit Components

Identifies and describes components of the outdoor unit for the air conditioner.

Battery Loading Procedure

Provides step-by-step instructions for loading batteries into the remote controller.

Base Operation

Unit Start and Mode Selection

Covers starting the unit and selecting operation modes like COOL, HEAT, DRY.

Temperature and Fan Speed Settings

Explains how to adjust temperature settings and fan speeds using the remote.

Air Conditioner Modes Explained

Details the functions of SMART, COOL, DRY, HEAT, and FAN operation modes.

Emergency and Test Operations

Emergency Operation Guide

Instructions for operating the unit in emergency situations when the remote is unavailable.

Test Operation Procedure

Steps for performing a test operation to check the unit's functionality.

Air Flow Direction Adjustment

Vertical Flap Control

How to adjust the vertical flap for air flow direction using the remote controller.

Swing Function Operation

Explains how to use the swing function to control air flow direction.

Healthy Airflow Function

Details the usage of the healthy airflow function for improved air circulation.

Sleep Operation

Sleep Mode in Cooling/Dry

Describes the temperature adjustments for sleep mode during cooling and dry operations.

Sleep Mode in Heating

Explains temperature changes for sleep mode during heating operations.

Sleep Mode in Smart Operation

How sleep mode adapts to the automatically selected operation mode.

Sleep Function Limitations

Notes on sleep function availability with timer settings and fan mode.

Special Operation Modes

Turbo and Quiet Operation

Explains how to use TURBO for rapid heating/cooling and QUIET for silence.

Health Operation Function

Details the anion generator's function for air purification and balancing.

Timer Operations

Setting Timer ON/OFF

Step-by-step guide to set the timer for the air conditioner to turn on or off.

Cancelling Timer Settings

How to cancel or reset timer settings if needed.

Airflow and Comfort Settings

Healthy Airflow Function Usage

Guide to setting the healthy airflow function for comfort conditions.

Healthy Airflow Cancellation

How to cancel the healthy airflow function and reset louvers.

Regulatory Compliance

European Model Conformity

Details on European regulations and directives the product conforms to.

Refrigerant Information

Important information regarding the refrigerant used, including type and GWP.

Indoor Unit Installation

Required Installation Tools

Lists the necessary tools for installing the indoor unit of the air conditioner.

Choosing the Installation Location

Guidelines for selecting an optimal and safe location for the indoor unit installation.

Indoor Unit Installation Diagram

Visual representation and dimensions for installing the indoor unit.

Mounting Plate and Wall Hole

Mounting Plate Installation

Steps for properly fixing the mounting plate to the wall.

Wall Hole Preparation

Instructions for making the wall hole and fitting the piping cover.

Piping and Unit Connection

Piping Installation Methods

Details on different piping directions and their installation procedures.

Securing the Indoor Unit

How to correctly hang and fix the indoor unit body onto the mounting plate.

Electric Cable Connection

Procedure for removing the wiring cover and connecting the electric cable.

Electrical and Piping Connections

Indoor/Outdoor Cable Connection

Detailed steps for connecting the electrical cables between indoor and outdoor units.

Wiring Specifications and Precautions

Information on connecting wires, power source, and precautions.

Piping Cutting and Flaring

Instructions for cutting and flaring refrigerant pipes for installation.

Installation Checks and Drainage

Drainage Installation Requirements

Guidelines for correctly installing the drain hose to ensure proper drainage.

Installation and Test Run Checklist

A checklist of items to verify during installation and before test run.

General Maintenance Tips

Smart Usage Recommendations

Tips for optimal room temperature, ventilation, and remote controller care.

Cleaning and Long-Term Storage

Guidance on cleaning the unit, avoiding specific cleaning agents, and storage.

Air Filter Maintenance

Air Filter Cleaning Procedure

Step-by-step instructions for cleaning the air filter of the indoor unit.

Air Purifying Filter Replacement

Instructions for replacing the air purifying filters, including types and care.

Cautions and Warnings

Installation Cautions

Warnings and prohibitions related to the installation process to prevent electric shock, fire, or leakage.

Operational Cautions

Precautions to follow during operation, such as power supply, voltage, and airflow direction.

Usage Prohibitions

Specific actions that must not be performed, like using for storage or placing objects on the unit.

Troubleshooting Guide

Normal Performance Issues

Addresses common issues like delayed restart, operational noise, and smells with causes and checks.

Multiple Check Issues

Covers problems like mist/steam, fan speed not changing, and poor cooling with diagnostic steps.

Specifications and Safety Notes

Applicable Ambient Temperature

Specifies the operating temperature ranges for cooling and heating modes, both indoor and outdoor.

Safety and Power Supply Notes

Important notes on power cord, fuses, wiring standards, and battery disposal.

Aura AR35TK-IN User Manual

Table of Contents