STEP 1
STEP 4
Place the light back in.
STEP 5
Done
STEP 3
Connect positive AUX wire to the positive wire on the Dome light.
Connect negative AUX wire to the negative wire on the Dome light.
FOR DOME LIGHT WIRING
(DOUBLE AUX WIRES)
OPTION B
AURA PROAURA ORIGINAL
STEP 2
Remove the dome light plastic cover.
Using a screwdriver, remove the two Phillips-head
screws on the cover. Next, remove the dome
light module, locate the power wires.
AURA ORIGINAL AUX WIRING FOR DOME/DOOR LIGHT
This feature actives white light only.
To Previous Page
Loading...