DOOR ASSIST
AUX WIRING
AURA
TM
INSTALLATION GUIDE
AUX WIRING FOR DOOR/DOME LIGHT
There are two ways theAUX WIRE / Door Assiston theAURA control box can be connected
on the vehicle in order to activate the door assists feature. Door assist allows you to choose
the desire color choice upon selection on the “OPT7 CONNECT” app.
This feature will activate when the AUX wiring is connected to the
positive and negative wiring of dome light or door light.
(*Please check the following wiring diagram before using this function
to prevent incorrect installation)
* NOTE: Trigger wire for door light is recommended if your dome light lights
up progressively when opening door.
DISCLAIMER
Scan for tutorial videos, troubleshooting tips, and more.
OPT7 Lighting is not liable for damages or personal injuries
while installing this product. The Installation Guide is
intended as assistance to reduce setup time. OPT7 Lighting
assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with
aftermarket upgrades, please seek professional assistance.
NEED SUPPORT?
OPT7 recommends installation for safety
and guidance.
Modied installations or installation
recommendations not specied by OPT7
Lighting will void product warranty.
To Next Page
Need help?
General