Auralex Acoustics T'Fusor - User Manual

Installation & User Guide
Installation & User Guide
Auralex
®
Acoustics, Inc.
1-800-959-3343 | 317-842-2600 | Auralex.com
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
Auralex
®
Acoustics, Inc.
1-800-959-3343 | 317-842-2600 | Auralex.com
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
938-1212.T'Fusor User Guide (01/13/2020 - 8:45 AM)
938-1212.T'Fusor User Guide (01/13/2020 - 8:45 AM)
T’Fusor
™
Sound Diffusors
T’Fusor
™
Sound Diffusors
Thank you for purchasing Auralex
®
T’Fusor
™
Sound Diffusors
These are highly effective acoustic diffusion devices that can be easily wall or ceiling mounted and the T’Fusors
are also sized to fit 2’x2’ drop ceiling grids.
The T’Fusors are supplied with the Auralex EZ-Stick Pro
™
peel & stick tabs.
Be advised that the EZ-Stick Pro Tabs are designed for permanent installations and will damage drywall
and painted surfaces when removed. For installations that require little or no damage to the wall surface we
recommend the use of Auralex EZ-Stick Tabs. See your Authorized Auralex dealer for details.
Mark the target position on your wall or ceiling where the panel will be mounted using small pencil marks, pieces
of masking tape or any similar non marring method. Be sure the wall surface where the EZ-Stick Pro Tabs
™
will
adhere is free of dirt, dust or other oily contaminants. The use of rubbing alcohol to spot clean the wall where the
tabs will adhere is recommended. Avoid the use of household cleaners.
Remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side of the perimeter flange at
the desired locations, usually near the corners.
Thank you for purchasing Auralex
®
T’Fusor
™
Sound Diffusors
These are highly effective acoustic diffusion devices that can be easily wall or ceiling mounted and the T’Fusors
are also sized to fit 2’x2’ drop ceiling grids.
The T’Fusors are supplied with the Auralex EZ-Stick Pro
™
peel & stick tabs.
Be advised that the EZ-Stick Pro Tabs are designed for permanent installations and will damage drywall
and painted surfaces when removed. For installations that require little or no damage to the wall surface we
recommend the use of Auralex EZ-Stick Tabs. See your Authorized Auralex dealer for details.
Mark the target position on your wall or ceiling where the panel will be mounted using small pencil marks, pieces
of masking tape or any similar non marring method. Be sure the wall surface where the EZ-Stick Pro Tabs
™
will
adhere is free of dirt, dust or other oily contaminants. The use of rubbing alcohol to spot clean the wall where the
tabs will adhere is recommended. Avoid the use of household cleaners.
Remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side of the perimeter flange at
the desired locations, usually near the corners.

Summary

Initial Installation with EZ-Stick Pro Tabs

EZ-Stick Pro Tabs Warning and Alternatives

Warning about permanent installation damage and suggesting alternative tabs for less damage.

Mounting Preparation and Tab Application

Steps for marking positions and applying adhesive tabs to the panel flanges.

Final Mounting Steps and Alternative Methods

Completing EZ-Stick Pro Tab Mounting

Final step of pressing panels into place after applying adhesive tabs.

Alternative Mounting Options

Information on mounting using mechanical fasteners like screws or nails.

Rear Cavity Acoustic Treatment

Options for filling the rear cavity for low frequency absorption.

Overview

1. Key Features and Specifications

The Auralex T'Fusor™ Sound Diffusor is an acoustic diffusion device designed to be easily mounted on walls or ceilings. These diffusers are also sized to fit standard 2'x2' drop ceiling grids, offering versatile placement options for various acoustic environments. The primary function of the T'Fusor is to scatter sound waves, thereby reducing flutter echoes and standing waves, and creating a more balanced and natural sound field within a room. This improves the clarity and intelligibility of audio, making it suitable for recording studios, home theaters, control rooms, and other spaces where acoustic accuracy is critical.

Key Features and Specifications:

• Acoustic Diffusion: The T'Fusor is engineered to effectively diffuse sound, preventing the buildup of unwanted reflections that can muddy sound quality. By scattering sound waves across a wider area, it helps to create a more even and controlled acoustic environment.
• Mounting Versatility: Designed for both wall and ceiling applications, the T'Fusor offers flexibility in installation. Its compatibility with 2'x2' drop ceiling grids makes it particularly convenient for integration into existing ceiling systems without extensive modification.
• EZ-Stick Pro™ Tabs for Installation: Each T'Fusor comes with Auralex EZ-Stick Pro™ peel & stick tabs for straightforward installation. These tabs are designed for permanent installations, providing a strong and lasting bond.
• Permanent Installation Warning: Users should be aware that the EZ-Stick Pro Tabs are intended for permanent installations and will likely cause damage to drywall and painted surfaces if removed. For installations requiring minimal damage to wall surfaces, Auralex EZ-Stick Tabs (a different product) are recommended. Users are advised to consult their Authorized Auralex dealer for details on alternative installation methods.
• Surface Preparation: Proper surface preparation is crucial for effective adhesion of the EZ-Stick Pro Tabs. Before mounting, the target wall or ceiling surface must be free of dirt, dust, or oily contaminants. Spot cleaning the wall with rubbing alcohol where the tabs will adhere is recommended. The use of household cleaners should be avoided, as they may leave residues that interfere with adhesion.
• Installation Procedure (EZ-Stick Pro Tabs):
  1. Marking Position: Mark the target position on the wall or ceiling using small pencil marks, pieces of masking tape, or any similar non-marring method to ensure accurate placement.
  2. Tab Application (First Layer): Remove one of the release layers from the EZ-Stick Pro Tabs and affix it to the rear side of the perimeter flange of the T'Fusor, typically near the corners.
  3. Tab Application (Second Layer & Mounting): Remove the second layer of release paper from each EZ-Stick Pro Tab. Carefully orient the panel's position before making contact with the wall. Once aligned, press the panel firmly in place with moderate pressure to ensure a secure bond.
• Mechanical Fastener Option: The T'Fusor can also be mounted using mechanical fasteners such as screws or nails. However, careful drilling of the flange will be required to avoid damaging the diffuser. It is essential to use fasteners appropriate for the specific type of wall construction to ensure a secure and safe installation.
• Rear Cavity for Absorption: The rear cavity of the T'Fusor offers an additional acoustic treatment opportunity. It can be filled with Auralex Mineral Fiber Insulation or covered with Auralex PlatSheet™ / PlatFoam™ to provide low-frequency absorption. This feature allows for a hybrid approach to acoustic treatment, combining diffusion with absorption to address a wider range of acoustic issues.
• Safety Precaution (Mineral Fiber Insulation): When utilizing Mineral Fiber Insulation in the rear cavity, users must employ personal safety equipment appropriate for handling fiberglass to prevent skin irritation or respiratory issues.
• Support and Information: For further information or assistance, users can visit Auralex.com or contact Auralex directly via phone at 1-800-959-3343 or 317-842-2600.
• Manufacturer Information: Auralex Acoustics is located at 9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256. The product is identified with the document number 938-1212.T'Fusor User Guide (01/13/2020 - 8:45 AM).

The T'Fusor is a robust solution for improving room acoustics, offering both ease of installation and the flexibility to integrate additional absorption for comprehensive sound control. Its design reflects Auralex's commitment to "Total Sound Control® Since 1977," providing professional-grade acoustic solutions for a variety of applications.

Auralex Acoustics T'Fusor Specifications