AURATON Auriga - Disabling the Temporary Temperature Reduction; FrostGuard Function

26/10/21, 1:37 μ.μ.
AURATON Auriga - AURATON manuals
16/23
NOTE:
The "temporary temperature reduction" mode always starts when the function is
turned on. This means that any temporary temperature reduction should be
programmed at a time when we want such a change to take place.
Disabling the "temporary temperature reduction"
To disable the "temporary temperature reduction" mode, press the & button again
for 3 seconds . The display will show only the room temperature and the AURATON
Auriga will return to its normal operating mode.
FrostGuard function
AURATON Auriga is equipped with a special "FrostGuard" function, which protects the
room against possible freezing. This function is activated when AURATON Auriga is
turned off .
With the AURATON Auriga turned off, when the room temperature drops to 2 ° C, the Fr
( !
) And a symbols appear on the display and the relay will turn on.
When the
temperature rises to 2.2 ° C, the display will turn off again and the relay will disconnect
the contacts.