Rear Panel
1. Analog Audio Output - XLR Right
2. Analog Audio Output - RCA Right
3. Analog Audio Output - XLR Left
4. Analog Audio Output - RCA Left
5. Digital Audio Input - Optical SPDIF
6. USB Audio Class 2.0 Output
Connect to the USB input of a USB compatible digital-to-analog converter.
7. Gigabit Ethernet port
To connect to home networks and Network Attached Storage (NAS) devices. The Ethernet
cable should be connected to the network router before turning on the Aurender.
8. USB 2.0 Data Ports
For copying from external USB memory devices.
9. AC Power Switch
Press away from the AC power socket to turn on, and towards the power socket to turn o.
The rear panel power switch should be used only after the unit has been turned o
completely using the front panel On/O button, or using one of the power o options from
the Conductor App. Abnormal shutdown or using the rear panel power button while the unit
is in operation or standby can cause the system to check itself after an abrupt power down. In
this case, a message will appear on the display stating that the unit is checking the system.
10. AC Power Socket
Connect to a power outlet with an AC Power cord.
MQA(Master Quality Authenticated)
To Next Page
Loading...
