Connect A1000 with your TV using ARC
1. Check that your TV has HDMI ARC (Audio Return Channel) and connect the A1000’s ARC port
with this input using HDMI 1.4 or newer cable.
2. Connect main power to your A1000 unit and power it ON.
3. Power ON your TV, enable HDMI/ARC audio input from TV side. Make sure to setup audio
output to PCM.
4. A1000 will now be operated from your TV via CEC commands from TV. This will allow you to
use you TV-remote to adjust volume of the A1000 and also the A1000 will power ON and OFF
together with your TV.
5. A1000 will power on/off with TV only in ARC input mode.
To Next Page
Loading...