Connect A1000 through BT:
1. Change input to “BT” mode by pressing remote button #13.
2. You can connect A1000 up to two devices thru BT.
3. For initial setting, it should be in pairing mode. Please press the “Menu” (3 lines) button on
front panel or remote. The LCD will show “pairing request” message.
4. Please turn on BT on your phone and search for “A1000”, then select it.
5. It will show “connecting” on LCD when trying to connect and show “connected” when done.
6. If two devices are already connected, you need to disconnect or unpair one of them to
connect another BT device. Otherwise, the below screen will show up when pressing “Menu”
button.
To Next Page
Loading...