A200 Hardware Guide
The following guide is intended as an overview of your Aurender's hardware
interface. Detailed installation information is found in the included
and a comprehensive Conductor App Overview and How-To guides are found in the
.
Box Contents
• Aurender A200
• Handheld remote control
• AC Power Cord
• Quick Start Guide
Not included: An iOS (iPad or iPhone) or Android device is required to interface with
and control your Aurender. The Aurender must be connected to a Local Area
Network (LAN) via Ethernet (CAT5 or higher) in order to facilitate communication
between your remote device and the Aurender. Please review the "Connect to Local
Area Network (LAN)" section of the included for more information
on network connectivity.
Front Panel
To Next Page
Need help?
General
