- 6 -
The diagram below is a guideline to configure the Aurender for setup with your home network and connecting to
an external USB drive for transferring music content*. For best performance, Aurender recommends locating your
WiFi router/Access Point in the same room the Aurender music server will be located in. In order to avoid network
conflicts, Aurender also recommends that your WiFi router is configured for "bridge" or "access point" mode.
*Please note, the diagram below is based on a typical home network configuration using the modem and router
provided by an internet service provider. For more advanced network configurations, please refer to our network
configuration guide on our support site: support.aurender.com
STEP 2: Connect the Aurender to your
local network and USB external drive
ACS10
All Other Aurender
To Next Page
Loading...
