- 8 -
Check the software version of the Aurender by navigating to the Upgrade tab in the Settings menu (6). The unit will
automatically check for the latest software version. If an update is available, the button will allow you to install the
latest version of the system software (7).
STEP 3: Update the Aurender's System
Software to the latest version
After selecting the latest software update, a download will start in a few seconds. After the download is finished, you
need to start upgrade by pressing “Upgrade Aurender System Software” in the same UI and the Aurender’s front
panel will display the status of the software update progress based on the percentage (%) completed. At this point
you should exit the Conductor app and wait for the update to complete. The Aurender will reboot after the update
is finished, and you may open the Conductor App again to begin copying music to the internal storage.
To Next Page
Loading...
