To Next PageTo Next Page
Need help?Do you have a question about the Aurender W20SE and is the answer not in the manual?
Controls the power state of the Aurender device, switching between active and standby modes.
The primary screen displaying playback information, menus, and system status.
Buttons used to navigate through and select options within the device's display menu.
Buttons for controlling audio playback, including play, pause, and track skipping.
Socket for connecting the power cable to supply electricity to the unit.
Digital audio output via USB for connecting to compatible DACs or audio interfaces.
Balanced digital audio outputs using XLR connectors for high-fidelity audio transmission.
Digital audio output via an optical TOSLINK connector.
Standard digital audio output using an RCA connector for SPDIF signals.
High-quality digital audio output via a BNC connector for SPDIF signals.
Input for an external word clock signal to synchronize digital audio devices.
Ports for connecting external storage devices or other USB peripherals.
Network port for connecting the device to a local area network via Ethernet cable.
General