Outdoor sensor
34 Folding stand 35 Temperature display
36 Humidity display 37 Selected channel
38 LED operating indicator 39 Hole for wall mounting
40 Channel selection switch 41 Battery compartment
42 °C/°F-button 43 TX-button
Securely placing or mounting the weather station
The weather station with outdoor sensor is not designed for operation in rooms with high
humidity (i. e. bathroom). Use the included screws and anchors for wall mounting. Make
sure that:
sufficient ventilation is always guaranteed (don’t place the device on shelves or where
curtains or furniture block the ventilation holes, and ensure that there are at least 10 cm
of space on all sides);
the device isn’t placed on a thick carpet or bed during operation, no direct heat
sources (i.e. radiators) influence the device;
no direct sunlight reaches the device;
contact with splashing or dripping water must be avoided (don’t place any items filled
with liquids, i.e. vases, onto or next to the device);
the device doesn’t stand near magnetic fields (i.e. speakers);
no foreign objects or dust penetrate the housing;
candles and other open flames must be kept away from this product at all times to
prevent the spread of fire.
Securely placing or mounting the outdoor sensor
Place the sensor in a location where it is protected from the weather, for example under
an awning or carport. The sensor has an IPX4 rating and is therefore protected from
water splashes. Use the included screws and anchors for wall mounting. Make sure that:
the sensor hangs or stands upright;
sufficient ventilation is always guaranteed (don’t place the device on shelves or where
curtains or furniture block the ventilation holes, and ensure that there are at least 10 cm
of space on all sides);
no direct sunlight reaches the device;
the device doesn’t stand near magnetic fields (i.e. speakers);
no foreign objects or dust penetrate the housing;
sensitive surfaces are protected before placement.
To Next Page
Loading...
