8 GB
Parts description
The control panel (see Fig. A)
1
ALARM button: Press this button to access the alarm
function. Use to activate / deactivate the alarm function and
shut off the alarm.
2
MODE button: Press and hold down this button to access
the general settings for the product. Confirm settings with this
button. In activate alarm mode, press this button to return to
clock mode.
3
▲ / RCC button: Press this button to select 24 or 12 hour
format. Press and hold down this button to activate / deactivate
RCC signal reception. In settings mode use this button to
increase the values you wish to set.
4
▼ / ° C / ° F button: Press this button to select the temper-
ature display unit (° C or ° F). In settings mode use this button
to decrease the values you wish to set. Press and hold down
this button to turn on / off the automatic radio time receive
function manually.
5
SNOOZE / LIGHT button: When the alarm sounds
press this button to snooze the alarm for 10 minutes. Otherwise
press this key to activate the backlight for approx. 5 seconds.
To Next Page
