13 GB/IE
Operation
Switching the alarm on and off
Switch the alarm function on by moving the ALARM switch
ON / OFF
8
to the ON position. When the alarm is switched
on, the coloured indicator
2
turns up green. When the alarm
is switched off, the coloured indicator
2
turns up red.
Turn the ALARM rotary control
3
to set the alarm time. The
alarm sounds for approx. 2 minutes when the set alarm time is
reached.
Using the snooze function
Press the SNOOZE / LIGHT button
1
to activate the snooze
function. The light on the back of the device illuminates for
about 3 seconds.
Press the SNOOZE / LIGHT button
1
when the alarm signal
sounds. The light on the back of the device illuminates for about
3 seconds. The alarm signal stops sounding for approx. 5 minutes.
The alarm sounds again after approx. 5 minutes.
Note: You can also activate the snooze function using the movement
sensor. The sensor can be triggered approx. 1 cm in front of the
device. To ensure that the movement sensor works properly, you
To Next Page
Loading...
