What to do if my auronic AU3251 is not performing?
If your auronic Freezer isn't working, try these steps: First, ensure the switch is turned on and that the plug is correctly connected to the socket. Then, check the fuse to see if it has blown. Verify that the power supply is functioning correctly. Also, avoid frequently turning the freezer on and off, as this can cause a delay in the compressor startup.
Why are the compartments of my auronic AU3251 too hot?
The compartments of your auronic Freezer might be too warm because the lid has been opened frequently or a large amount of hot or warm food has recently been stored inside. Another reason could be that the freezer has not been plugged in for an extended period.
What to do if code F2 is displayed on my auronic AU3251 Freezer?
If code F2 appears on your auronic Freezer, it indicates that the condenser fan is overloaded. To resolve this, turn off the power to the freezer for 5 minutes, then restart it.
What to do if code F3 is displayed on my auronic AU3251 Freezer?
If code F3 is displayed on your auronic Freezer, indicating that the compressor starts too often, turn off the power to the product for 5 minutes and then restart it.
What to do if code F5 is displayed on my auronic AU3251 Freezer?
If code F5 is displayed on your auronic Freezer, indicating overheating of the compressor and electronics, turn off the power to the product for 5 minutes and then restart it.
What to do if code F4 is displayed on my auronic AU3251?
If code F4 is displayed on your auronic Freezer, indicating that the compressor does not turn on, turn off the power to the product for 5 minutes and then restart it.
What to do if code F6 is displayed on my auronic AU3251?
If code F6 is displayed on your auronic Freezer, indicating that the controller cannot detect a parameter, turn off the power to the product for 5 minutes and then restart it.
Why is my food frozen in auronic Freezer?
If your food is freezing in the auronic Freezer, it's likely that the temperature setting is too low. Adjust the temperature to a higher setting.
What does code F1 mean on my auronic AU3251 and how to fix it?
Code F1 on your auronic Freezer indicates low voltage to the product. To fix this, adjust the battery protection setting from High to Medium or from Medium to Low.
General| Type | Upright Freezer |
|---|---|
| Number of Doors | 1 |
| Defrosting System | Manual |
| Color | White |
| Voltage | 220-240V |
| Frequency | 50Hz |
To Next Page