v 1.0.0 Last updated July 24, 2021
IKKI68 Aurora
Tromso PCB Instructions
General info
1. USB supports up to 1000HZ real report rate. Support CtoC interface (only suitable for
C-port keyboard)
2. Both USB and Bluetooth modes support NKRO.
3. It can run on Win, Android, 1inux, Apple (shortcut key switch required) and other
operating systems.
4. No EEPROM memory, Flash memory backlight mode.
Lighting Effects
All switch light effects support global control: brightness increase/decrease (a total of 5 levels
default to the fifth level), speed (a total of 5 levels default to the third level).
FN + ↑: Increase brightness of the keyboard, 5 levels in total
FN + ↓: Reduce brightness of the keyboard is reduced, 5 levels in total
FN + →: Speed up the lighting effect, 5 levels in total
FN + ←: Slowed downs the speed of the lighting effect, 5 levels in total
The above control methods support long-press continuous adjustment, single-press once to
adjust a level, and long-press to continuously adjust more than one level. When the limit value
is reached, the indicator will flash 5 times.
Detailed description of lighting effects:
FN+O: switch light backlight switch
FN+Z: switch lighting effect switch, supports 17 kinds of effects.
FN+X: Backlight color switch
FN+C: LOGO lighting effect switch
FN+V: LOGO switch
FN+B: LOGO color switch
To Next Page
Need help?
General