To Next PageTo Next Page
Need help?Do you have a question about the Aurora WM675XB and is the answer not in the manual?
General| Sheet Capacity | 6 Sheets |
|---|---|
| Bin Capacity | 15 liters |
| Auto Start/Stop | Yes |
| Overload Protection | Yes |
| Jam Protection | Yes |
| Noise Level | 65 dB |
| Throat Width | 220 mm |
| Can Shred | Paper, credit cards |
| Shred Size | 5/64" x 25/64" (2x10mm) |
| Shredding Size | 2 x 10mm |
Securely mount shredder to wastebasket and connect power cord to a standard 120V AC outlet.
Shredder requires correct mounting with a safety interlock flap to operate; will not function otherwise.
Plastic bags lining the wastebasket can interfere with the activation switch and prevent operation.
Avoid touching feed opening, aerosol products, loose clothing, or hair near the shredder.
Do not use petroleum-based oils; never dispose of flammable chemicals like nail polish or gasoline in the basket.
Do not shred large paper clips, envelopes, labels, newsprint, transparencies, cardboard, or hard plastic.
Key safety practices: use accessible outlet, unplug for cleaning, empty basket, avoid water, don't self-service.
Explains the AUTO/ON, OFF, and REV operational modes and their functions.
Details ShredSafe™ technology and the function of the 'READY' green LED indicator.
Steps to start shredding: select 'Auto' mode, open cover, and align status indicator to 'READY'.
Understanding 'READY' and 'DISABLED' states, and recommendations for closing the paper feed slot.
Guidance on shredding credit cards, handling staples/paperclips, and avoiding overfeeding/overheating.
Regular oil lubrication is required for optimal performance; use non-aerosol vegetable oil monthly.
Always unplug before cleaning. Wipe with a dry cloth; do not use water or flammable cleaners.
Periodically empty the wastebasket to prevent overloading and damage to the cutting mechanism.
Check power, overheating, correct mounting, cover position, plastic bags, and sensor activation.
Using a plastic bag to line the wastebasket can prevent the shredder from operating properly.
Feed paper directly into the center of the slot to activate the sensor, especially for small items.
If in 'Rev' but not 'Auto', check sensor blockage or paper jams; insert stiff card to clear.
If constantly running in 'Auto', the activation sensor may be blocked; clear with a stiff card.
Use REV mode to loosen jams; if stubborn, use shredder oil and a stiff card after 30 mins.
Contact Aurora Service Center for questions, operation issues, or spare parts via phone, email, or website.
Cutting cylinders warranted for 3 years; other parts for 1 year from original purchase date.
Warranty void if product is damaged, misused, improperly serviced, or if factory seal is broken.
Implied warranties limited to warranty period; specific legal rights may vary by state.
Call Service Center for specific return instructions before returning any product.
