EN-2
Attention: Fully charge the headset before using the
headset for the first time.Playtime varies according to
volume level and audio content.
Use the USB charging cable of the accessories provided to
charge the headset. Plug the smaller end of USB charging
cable into the Micro-USB interface on the right side of the ear
cup; plug the other bigger end of charging cable into the USB
interface of other power charging devices. When the battery is
being charged, the indicator turns red. It takes 3-6 hours to
fully charge the battery for the first time. Afterward, the
charging time is 2-3 hours. When the battery is fully charged,
the indicator light goes off.
Note: You may use the Wireless function while charging the
battery. However, the M04S headset will take longer to be fully
charged. To use the audio cable while charging the battery, the
headset will automatically turn off. This will not affect the
charging duration. When the battery level is low, the M04S
headset will issue an audio reminder.
a) Power on: Press and hold the “Power on/off” button for
about 2-4 seconds until an audio sound is heard and the LED
indicator flashes blue every second.
b) Power off: Press and hold the “Power on/off” button for
about 3-5 seconds until an audio sound is heard and the LED
indicator flashes red for 1-2 seconds and then turns off.
4. Charging the headset
5. Power on and off
Steps before pairing
Attention: Prior to pairing with the headset, please be sure that
your desktop PC or laptop is equipped with Wireless functions. If
there is no Wireless function installed in the PC, you need to
purchase a Wireless adaptor of Wireless version 2.1 or later.
6. Pairing with the Wireless
6). Power on-off / Answer button 7). Volume -
8). Volume + 9). 3.5mm audio interface
10). LED indicator
To Next Page
Loading...
Need help?
General
