7
5.2 User Management
5.2.1 Bluetooth management
After mobile phone and door lock connected, Click " " as show as figure2-1 to unlock. (Make sure the
phone is within 5 meters from the door lock)
5.2.2 Remote control management(Option)
After confirming that your phone and door lock are connected to the gateway, Click " " as show as
figure 2-1 to unlock. You can unlock it anywhere you have a network connection. (How to set up the gateway
to connect to your phone refer to step 5.3)
5.2.3 e-Key management
Click on the " " as shown in figure 2-1,you can send the eKey to other users of AUSLOCK to
authorize the unlock
（
the receiver must be download the APP and register an account
）
→
Enter recipient's
account of AUSLOCK, set the name and effective time of the eKey as shown in figure 2-2
→
Send
→
The
recipient's account has Bluetooth unlock permission
5.2.4 The Admin password management
Click " "as shown in figure 2-1
→
See Basic
→
Admin Passcode as shown in finger2-3
→
input
Passcode on the keypad of lock
→
“#”to unlock.
5.2.5 Dynamic password management
Click " "as shown in finger 2-1
→
finger 2-4 You can set the effective time and effective number of
passwords
→
Generate password
→
Input password to unlock.
5.2.6 Unlock records
Click " "as shown in finger 2-1
→
you can query your unlock record as shown in finger 2-5
To Next Page
Loading...