Aussie WEED WAND User Manual

WEED WAND OPERATOR MANUAL
You must read this publication before using
the Weed Wand.
No part of this publication shall be
reproduced, transmitted, or sold in whole
or in any form, without the prior written
consent of the owner of Aussie Flame
Weeders (AFW), Small Scale Farm Tools.
All trademarks and registered trademarks
appearing in this guide are the property of
the owner.
Users of the Weed Wand do so at their
own risk and acknowledge the use of the
Weed Wand is dangerous, involves high
temperatures, open flame and gas and there
is a real risk of burning. Users of the Weed
Wand release and indemnify the owner from
any claim, loss, damages and injury from
their use of the Weed Wand including from
any reliance on this publication except to the
extent such damage, loss or injury is caused
by the negligence of the owner.
This operator’s manual provides practical
instructions for the safe assembly and use
of the Weed Wand on small scale vegetable
operations. This manual must be read and
applied in its entirety to ensure the safe
use of the Weed Wand. This manual does
not contain information regarding legal
requirements applicable to the use of the
appliance for applications other than the
above purpose.
© Aussie Flame Weeders – Small Scale Farm
Tools Pty Ltd (SSFT), 2018. All Rights Reserved.
Thankyou for purchasing the Weed Wand, we hope it helps keep your weeds at bay!
1. Read all safety instructions before using
the Weed Wand.
2. Safety gloves should be worn at all times.
3. Long sleeves, long pants and boots
should be worn at all times.
4. Do not operate the Weed Wand if you
have not read or do not understand the
Operator Manual.
5. Do not operate the Weed Wand if you are
not capable of safely operating this type
of equipment.
6. Do not operate any equipment if you are
subject to seizures, loss of consciousness
or fainting.
7. Do not use if you’re aected by alcohol or
drugs including prescription medications.
8. Do not allow children to operate the
Weed Wand at any time.
9. Take safety precautions around children
and animals at all times.
10. Keep hands and feet away from the
burner head whilst the machine is
operating as the flame may not be visible,
particularly in bright sunshine.
11. Do not operate the Weed Wand when a
total fire ban is enforced or on days when
there is an increased fire danger risk.
Always check the fire risks and regulations
within your region before using the Weed
Wand and if in doubt contact your local
fire authority.
It is the legal duty of the purchaser of the Weed Wand to ensure the user is properly trained
and supervised to use the Weed Wand safely without risk to themselves or others.
important warnings
safety instructions

Aussie WEED WAND Specifications

General

Brand	Aussie
Model	WEED WAND
Category	Lawn and Garden Equipment
Language	English

Summary

Important Warnings

Safety Instructions

Pre-Operation Safety Checks

Read all instructions, ensure operational capability and understanding, and avoid operation under specific health conditions.

Personal Protective Equipment

Mandates wearing safety gloves, long sleeves, long pants, and boots at all times during operation.

Supervision and Environment

Keep children and animals away, do not allow children to operate, and maintain safe distance from the burner.

Fire Danger and Restrictions

Do not operate during fire bans or high fire danger days; check local regulations before use.

Adverse Conditions and Hazards

Avoid operation in high winds, near flammable substances, hazardous liquids, or in enclosed spaces.

LPG Handling and Equipment Safety

Follow correct LPG procedures, never leave unattended while alight, and ensure proper cooling after use.

Fire Extinguishing Readiness

Always have fire extinguishing equipment easily accessible and ready for use during operation.

Burner Safety After Use

Be cautious of residual heat; the burner head can remain alight after gas is turned off.

Assembly Instructions

Component Check and Layout

Remove all contents from packaging and check all listed items are present and not damaged.

Hose and Fitting Connections

Apply thread tape or sealant to male threads, attach hose ends securely, and ensure no leaks.

Gas Bottle Connection

Connect POL male fitting to LPG gas bottle and tighten securely, testing for leaks with soap water.

Operating Safely

LPG Valve and Leak Checks

Ensure LPG valve is closed when not in use and inspect hoses/connections for leaks before each use.

Ignition and Gas Flow

Be ready to light burner immediately after opening valve, never allow prolonged LPG flow to unignited burner.

Gas Leak Response

If gas smell is detected, shut off gas, extinguish flame, check for leaks, and do not relight until repaired.

Safe Operation Procedure

Have lighter ready, ensure safe position, turn gas on at low flow, and light burner with flint lighter.

Flame Adjustment and Bottle Management

Adjust LPG flow for desired flame size; higher flow uses more LPG and can freeze the bottle faster.

Post-Operation Storage

Always ensure the burner head is completely extinguished and cooled down before storing the Weed Wand.