To Next PageTo Next Page
Need help?Do you have a question about the Austa AU-1P3002G and is the answer not in the manual?
Provides important instructions and guidance for using the microinverter equipment.
Details product changes, manual updates, and website references for the latest version.
Specifies the range of Austa Microinverter models covered by this manual.
Identifies intended users for microinverters and provides installation recommendations.
Explains the safety symbols and their meanings used throughout the manual.
Addresses CE EMC compliance and provides guidance on resolving potential interference issues.
Details critical safety precautions for installation, operation, and maintenance of the microinverter.
Defines various symbols used in the manual, including treatment, caution, and danger indicators.
Describes the components and functionality of a typical grid-tied PV inverter system.
Introduces the Austa microinverter, its components, and system integration.
Guidelines for selecting optimal locations and ensuring adequate space for the microinverter.
Instructions on connecting PV modules to the microinverter, including supported configurations.
Information on AC branch circuit limits and requirements for paralleling microinverters.
Pre-installation steps and required devices for planning and installing the microinverter.
Procedure for connecting the PV modules' DC cables to the microinverter's input.
Guide to connecting the microinverter to the Austa Solar App via Wi-Fi.
Steps to register and add the microinverter to the AUSTA APP for monitoring.
Safe procedures for disconnecting the microinverter from PV modules and the grid.
Lists common faults and provides initial troubleshooting steps for microinverter issues.
Explains the meaning of different LED indicator statuses on the microinverter.
General| Model | AU-1P3002G |
|---|---|
| Category | Inverter |
| Output Power | 3000W |
| Output Voltage | 230V AC |
| Frequency | 50Hz |
| Protection Features | Overload, Short Circuit |
