BODY DETAILS
Removing the hood
Unlock the over-centre links on the rear stick to slacken the canopy.
Undo
the fasteners and release the toggle lever catches on the windshield. Release all
fasteners around the rear of the hood. Slide the
rea
r
hood
rail backward s clear
of the two slotted fasteners on the tonneau panel, and lift the hood from the
frame.
Fold the quarter-lights in-
wards, fo lding on a line
between the quarter-light and
back-light
Finally,
1'0 1/ the hood as
shown for storage
NO
TE.-
It
is most import
ant
that the instructions given should be followed
when folding and stowing the hood in order to avoid damage to the quarter- and
back-lights. Never fold the hood when it is wet or damp.
Folding the hood
Folding the hood
cor
rectly is of utmost importance; lay the hood on a flat
surface with the lining upw
ard
s.
Fo
ld the hood in the way shown in the illustra-
tion and then roll it up carefully, avoiding kinking.
15
To Next Page
