AUTEC AIRBM3V7L - 1 Battery Airbm3 V7 L; Technical Data; Plate

2
LIAIREA0-01
Battery AIRBM3V7L
AUTEC - Air series
1 Battery AIRBM3V7L
The A8 transmitting unit can only be powered through the battery AIRBM3V7L.
Always close the battery inside the transmitting unit and fasten it with
its cover and a screw: never use the transmitting unit if the battery is not
fastened under the cover with a screw.
A
B
C
D
A Battery housing
B Battery
C Cover
D Technical data plate
1.1 Technical data
Battery AIRBM3V7L: type/voltage/capacity ................................... Li-ion/3.7V /1300mAh
Max. recharge time ........................................................................................................ 4h
Recharge temperature ................................................... +5°C to +45°C (+41°F to +113°F)
Usage temperature .......................................................... -20°C to +55°C (-4°F to +131°F)
Storage temperature ...................................................... -20°C to +60°C (-4°F to +140°F)
a
a. Valid for a storage time of 6h, in conformity with the requirements of section 38.3 of the "UN
Manual of Tests and Criteria" (UN/DOT Transportation Testing). do not use or recharge the battery
at temperatures exceeding the limits provided in paragraph 1.6.
1.2 Plate
The battery has a plate showing battery's identi󰘰cation, main technical data, and marks (if any).
This plate must not be:
- removed from its position (removal will invalidate the guarantee)
- altered or damaged (contact Autec for replacement).