Autek Ikey 820 User Manual

Autek Ikey 820 Key Programmer
Page 1
Instruction for Update and Activate
AUTEK IKEY820 Key Programmer
1. What you need
1) AUTEK IKEY 820 key programmer
2) PC with Win10/Win8/Win7/XP
3) USB cable
2. Install update tool on your PC
1, Login the website link http://www.autektools.com/driverUIsetup.html
2, Select the item Autek Ikey 820 Update Tool V1.5 Setup from the list and install it to your
PC. Double click the setup file to start installing the update tool

Autek Ikey 820 Specifications

General

Form Factor	Micro ATX
Memory Slots	2
SATA Ports	4
USB Ports	4 x USB 3.0, 6 x USB 2.0
Video Outputs	HDMI, VGA
Audio	Realtek ALC662 6-Channel

Summary

What You Need for AUTEK IKEY 820

Install AUTEK IKEY 820 Update Tool

Download Update Tool from Website

Login to autektools.com to download the AUTEK IKEY 820 Update Tool V1.5 Setup.

Install Update Tool on PC

Locate the downloaded setup file and double-click to begin the installation process on your computer.

Update AUTEK IKEY 820 Device Software

Connect and Prepare for Update

Connect the AUTEK IKEY 820 to PC via USB, ensure 'USB SD DISK MODE', and verify SN/DISK.

Launch and Configure Update Tool

Open the AUTEK IKEY 820 Update Tool; ensure PC is online and tool is installed.

Initiate and Monitor Software Update

Input SN, click UPDATE, and wait for the process to complete, monitoring for messages.

Activate AUTEK IKEY 820 Device Tokens

Power Device and Access Activation

Power the AUTEK IKEY 820 and navigate to the ACTIVATE menu to obtain the REQ CODE.

Obtain and Input ANS Code

Use the REQ CODE in the Update Tool to get the ANS CODE, then input it into the device.

Confirm Activation and Check Tokens

Confirm activation on the device and check the token count in the ABOUT menu.

Authorize Specific Car Make Updates