Email: sales@autel.com
Web: www.autel.com
AutoLink AL609P
Getting Started
Connect the OBD II cable’s 16-pin male adapter to the
vehicle’s DLC which is generally located under the vehicle
dash.
The device will be automatically powered up.
1 2
3 4
IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully. Use this unit
correctly and properly. Failure to do so may cause damage and/or personal injury and will void the product
warranty.
Your AutoLink AL609P is now ready to work.
Connect the OBD II cable’s female adapter to the AutoLink
AL609P.
Tighten the captive screws.
Scan QR Code to visit our website at www.autel.com.
Create an Autel ID and register the product with device’s
SN and password.
Thank you for purchasing AUTEL tool. Manufactured to a high standard, our tool will, if used according to these
instructions and properly maintained, give you years of trouble-free performance.
Quick Reference Guide
To Next Page
General