Thank you for purchasing AUTEL diagnostic tool. Manufactured to a high standard, our tool will, if used accord-
ing to these instructions and properly maintained, give you years of trouble-free performance.
Email: sales@autel.com
Web: www.autel.com
Quick Reference Guide
Getting Started
IMPORTANT: Before operating or maintaining this unit, please read the quick guide and user manual carefully,
pay extra attention to the safety warnings and precautions. Use this unit correctly and properly. Failure to do so
may cause damage and/or personal injury and will void the product warranty.
1
Scan QR Code to visit our website at www.autel.com.
Create an Autel ID and register the product with
device’s SN and password.
3
Connect the 16-pin male adapter of the main cable to
the vehicle’s DLC, which is generally located under
the vehicle dash.
Tighten the captive screw.
2
MaxiCOM MK906
Long press the Lock/Power button to turn on the
MaxiCOM MK906 diagnostic tablet.
Connect the main cable’s 15-pin female adapter to the
tablet and tighten the captive screws.
4
Your MaxiCOM MK906 is now ready to work.
To Next Page
Need help?
General