32
This mode only supports quantitative parameters that can be
represented digitally. If non-digital parameters are selected, a message
will display advising the user that the selected parameters are not
supported in this mode and to select 2 to 5 digital parameters. Tap Got
It to return to the previous screen and select supported parameters.
When unsupported parameters are selected, a message will appear
advising the user to select only supported parameters. A message will
also appear if more than 5 parameters have been selected. Please select
2 to 5 supported parameters and tap the OK button to merge.
3. Tap the Cancel Merging button at the bottom of the Live Data screen to
cancel merging.
To Top — moves a selected data to the top of the list.
Setting — tap to set recording duration: From 5 seconds to 60 minutes.
To set live data recording duration
1. Tap the Setting button at the bottom of the Live Data screen.
2. Tap the “>” button to the right of Recording Time After Trigger bar and select
a time length.
3. Tap OK to save the setting and return to the Live Data Setting screen, or tap
the “x” button at the upper-right corner to exit without saving.
4. Tap Done at the upper-right corner of the Live Data Setting screen to confirm
and save the setting, and return to the Live Data screen, or tap Cancel to exit
without saving.
Clear Data — tap to clear all cached live data.
Freeze — displays a still capture of retrieved data.
Previous Frame — moves to the previous frame of frozen data.
Next Frame — moves to the next frame of frozen data.
Play/Pause — tap to play/pause the frozen data.
Resume — tap to exit the freeze data mode and return to live data display.
Record — starts recording the live data of the selected data items. Tap the Record
button at the bottom of the Live Data screen. A message will display prompting user
to select parameters to record. Tap Got It to confirm. Scroll down and select data to
record. Tap the Record button to start recording. Tap the Resume button to stop
recording. The recorded live data can be viewed in the Review section at the bottom
of the Live Data screen. The recorded data can also be reviewed in the Data
Manager application.
Resume — tap to stop data recording and return to normal data display.
To Next Page