67
Figure 5-23 Sample ID Format Screen
3. Press the Y button to save your settings and return to previous menu, or
press the N button to exit without change.
Pressure Unit
1. From System Setup screen, use the UP/DOWN scroll button to select
Pressure Unit, and press the Y button.
2. From Pressure Unit screen, use the LEFT/RIGHT scroll button to select
the desired unit: kPa, Psi or Bar.
Figure 5-24 Sample Pressure Unit Screen
3. Press the Y button to save your settings and return to previous menu, or
press the N button to exit without change.
Temperature Unit
1. From System Setup screen, use the UP/DOWN scroll button to select
Temperature Unit, and press the Y button.
To Next Page
Loading...
