To Next PageTo Next PageWhy are the LEDs on my Autel Film Camera dim, and the display turns off?
If the LEDs on your Autel Film Camera imager head appear dim even at maximum brightness, the display switches between monochrome and color, or the display turns off shortly after being on, the most likely cause is a low battery. You should charge the battery to resolve this issue.
What to do if my Autel Film Camera will not turn on?
If your Autel Film Camera won't turn on, the cause is likely a dead battery. Replace the battery to solve the problem.
How to fix an Autel Film Camera display that is on but shows no image?
If the display of your Autel Film Camera is on but doesn't show an image, it could be due to a loose cable connection. Check and reattach the cable. Alternatively, the imager head might be covered by debris, so check if it is covered.
General| Brand | Autel |
|---|---|
| Model | MaxiVideo MV208 |
| Category | Film Camera |
| Language | English |
Guidelines for safe electrical handling and protection against shock hazards.
Precautions for personal well-being, including avoiding fatigue, over-reaching, and wearing protective gear.
Explanation of the various buttons and their functions for operating the videoscope.
Step-by-step guide for replacing the batteries in the handheld display unit.
Fundamental steps for operating the videoscope, including powering on, capturing images, and video.
Critical safety measures to follow during operation to prevent injury and tool damage.
Guidelines for preparing the tool and the work environment for safe and effective use.
