T
tylerhernandezJul 28, 2025
What to do if my Autel Analytical Instruments tool cannot turn on?
- AashleyburkeJul 28, 2025
If your Autel Analytical Instruments tool isn't turning on, the battery may be dead. Try charging the battery.
What to do if my Autel Analytical Instruments tool cannot turn on?
If your Autel Analytical Instruments tool isn't turning on, the battery may be dead. Try charging the battery.
How to fix Autel MaxiVideo MV480 display when it's on but shows no image?
If your Autel Analytical Instruments display is on but not showing an image, it could be due to a loose cable connection. Check and reattach the cable. Alternatively, the imager head may be covered; ensure it is not.
Frame Rate | 30 fps |
---|---|
Image Capture | Yes |
Video Recording | Yes |
Light Source | LED |
Video Format | AVI |
Resolution | 1280 x 720 pixels |
Camera | CMOS |
Storage | Micro SD card |
Battery | Rechargeable lithium battery |
Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
Connectivity | USB |
Camera Head | 8.5 mm |
Ports | USB, Micro SD |
Power Source | Battery |
Cable Length | 1 meter |
Precautions for safe operation in the work environment.
Precautions related to electrical hazards during operation.
Guidelines for operator safety and avoiding injury.
Identifies and describes the parts and connection points of the tool.
Details the function of each button on the videoscope.
Essential safety rules for charging the device battery.
Core steps for turning on and using the videoscope.