AuthenTrend ATKey - Page 19

19
| LED
Flashing
Touch your enrolled
fingerprint to verify
Standalone enrollment
(flashing from slow to fast,
then done by GREEN
meaning enrolled
fingerprint verified PASS);
Fingerprint calibration
(white flashing, done back
to blue)
User touch needs (but
any finger is ok)
Static ON
Power on, normal
state
Fingerprint verified
PASS (for a second)
•
Fingerprint
verified Failed
•
Erase fingerprint
•
Reset key
• Fingerprint sensor
calibration
•
Power on, but
firmware booting
failed
blue
green
red
white
cyan