3. Assembly Instructions
1. Unpack all items carefully and check inventory.
2. Attach wheels to axles by pushing wheel locking button on the outside of
the wheel and inserting the axle extension into the wheel. Make sure to
keep the locking button on the outside of the wheel pushed in during
this process, in order to enable the axle extensions, including the two
pins, to be inserted all the way into the wheel. If not locked in, the wheel
will not be connected to the clutch and will not be propelled. Test the lock by
trying to pull the wheel out. To disassemble the wheels, proceed in reverse
order.
3. Unfolding buggy.
4. Place battery pack on battery tray and fasten Velcro strap around battery
and fasten tightly. Insert battery plug into buggy outlet.
To Next Page
Loading...