18 3
You have purchased an Auto Meter Battery Extender. This is a fully
automatic battery charger and battery maintainer. It is designed to
work on all types of lead acid batteries, including Standard Flooded, AGM, and
Gel Cell. If you should have any questions about your Extender or charging
procedures, please see the back cover for contact information.
CONGRATULATIONS!
SPECIFICATIONS
Model Number BEX-1500 BEX-3000 BEX-5000
Charger Type Fully Automatic Fully Automatic Fully Automatic
Battery Voltage 12 V 12 V 6 V, 8 V, 12 V &
16 V
Charge Current (Max.) 1.5 A 3.0 A 5.0 A (3.0 A in 16
V mode)
Battery Compatibility Flooded, AGM,
Gel
Flooded, AGM,
Gel
Flooded, AGM,
Gel
Charging Modes
(Desulfation, Bulk,
Absorption, and Maintain)
Ye s Ye s Ye s
Fully Automatic /
Overcharge Protection
Ye s Ye s Ye s
Reverse Polarity Protection Ye s Ye s Ye s
Spark Free Connection Ye s Ye s Ye s
Ingress Protection IP65 Water
Resistant
IP65 Water
Resistant
IP65 Water
Resistant
LED Indicators 3 6 10
AC Input 100 - 240V AC /
50 - 60Hz 0.5A
108 -132V AC /
60Hz 1.0A
108 -132V AC /
60Hz 1.5A
Ambient Temperature -4 ºF to +122 ºF -4 ºF to +122 ºF -4 ºF to +122 ºF
Size 5.2" L x 3.2" W x
2.0" H
6.7" L x 3.2" W
x 2.2" H
7.9" L x 3.9" W x
2.4" H
Weight 1.0 lbs 1.4 lbs 2.0 lbs
Conforms to UL Std. 1236 Ye s Ye s Ye s
Certified to CAN/CSA Std.
C22.2 No. 107.2-01
Ye s Ye s Ye s
California Energy
Commission (CEC)
Compliant
Ye s Ye s Ye s
RoHS Compliant Ye s Ye s Ye s
CE Mark Ye s No No
36 MONTHS FROM DATE OF PURCHASE
The manufacturer warrants to the consumer that this product will be
free from defects in material or workmanship for a period of thirty-six
(36) months from the date of original purchase.
Products that fail within this 36 month warranty period will be repaired
or replaced at the manufacturer's option to the consumer, when
determined by the manufacturer that the product failed due to defects
in material or workmanship. This warranty is limited to the repair or
replacement of parts and the necessary labor by the manufacturer to
effect the repair or replacement of the product. In no event shall the
manufacturer be responsible for special, incidental or consequential
damages or costs incurred due to the failure of this product.
Improper use, accident, water damage, abuse, unauthorized repairs
or alterations voids this warranty. The manufacturer disclaims any
liability or consequential damages due to breach of any written or
implied warranty on its test equipment.
WARRANTY AND SERVICE INFORMATION
Warranty claims to the manufacturer's service department must be
transportation prepaid and accompanied with dated proof of purchase.
This warranty applies only to the original purchaser and is non-
transferable. Shipper damage incurred during return shipments is not
covered under this warranty. It is the responsibility of the shipper (the
customer returning the Test Equipment) to package the tester properly
to prevent any damage during return shipment. Repair costs for such
damages will be charged back to shipper (customer returning the Test
Equipment). Protect the product by shipping in original carton or add
plenty of over-pack cushioning such as crumpled up newspaper.
LIMITED WARRANTY
To Next Page
Loading...
Need help?
General
