9-11
FITTED EQUIPMENT
TECHNICAL DATA
determined in accordance with EN 624 or
Truma test conditions.
Manufacturer:
Truma Geratetechnik GmbH & Co. KG
P. O. Box 12252
85637 Putzbrunn (Munich)
Germany
Water contents: 10 litres or 14 litres.
Water pressure: up to max. 2.8 bar.
Type of gas: Liquid gas (propane/butane).
Operating pressure: 30 mbar.
Rated thermal output: 1500 W.
Gas consumption: 120 g/h.
Heating up time from approx. 15 deg C to
approx. 70 deg C (10 litres)
Gas operation approx. 34 mins.
Electrical operation: approx. 45 mins.
Gas and electrical operation: approx. 25
mins.
Heating up time from approx. 15 deg C to
approx. 70 deg C (14 litres)
Gas operation approx. 50 mins.
Electrical operation: approx. 72 mins.
Gas and electrical operation: approx. 38
mins.
Power consumption 12V
Ignition: 0.17A.
Heating up: 0.08A.
Standby: 0.04A.
Power consumption 230V
Heating up: (3.7A) 850W
Weight (empty): approx. 6.7 kgs.
Declaration of conformity:
The Truma-Ultrastore model has been tested
and approved through the DVGW and fulfils
the EC gas appliance guidelines (90/396/
EEC) as well as the associated EC
guidelines. The CE product number is
available for EU countries: CE-0085AP0038.
EEC Type Approval:
e1 022604.
Maintenance
Use wine vinegar for de-scaling the water
heater; this should be introduced into the
appliance via the water supply. Allow the
product to react and then thoroughly flush out
the appliance with plenty of fresh water. To
sterilise the water Truma recommend “Certisil
Combina” or “Micropur Forte”.
Note: The water tank in the Truma Ultrastore
is of high quality stainless steel. The plastic
elbow water connections and the safety/drain
valve fulfil the EC guidelines for food quality
in plastic parts (90/128/EEC).
In order to avoid the colonisation of micro
organisms, Truma recommend heating up the
tank to 70 deg C at regular intervals and not
using the water as drinking water.
To Next Page
